CPE Jacket – EPR Insulation Pairs Overall Shield 90°C – 600 Volt

Home > Thermocouple > CPE Jacket – EPR Insulation Pairs Overall Shield 90°C – 600 Volt
Choose Favorites List
Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

CPE Jacket – EPR Insulation Pairs Overall Shield 90°C – 600 Volt

    Download Spec Sheet

    CPE Jacket – EPR Insulation Pairs Overall Shield 90°C – 600 Volt

    Construction
    Category Conductor Description Solid thermocouple extension wire EX: Purple Jacket | Purple/Red Conductor | Chromel/Constantan JX: Black Jacket | White/Red Conductor | Iron/Constantan KX: Yellow Jacket | Yellow/Red Conductor | Chromel/Alumel TX: Blue Jacket | Blue/Red Conductor | Copper/Constantan
    Category Insulation Description Ethylene Propylene Rubber (EPR)
    Category Overall Shield Aluminum mylar shield with drain wire
    Category Jacket Description Flame-retardant, sunlight resistant, Chlorinated Polyethylene (CPE)
    • For use as a 600 volt, multi pair thermocouple instrumentation cable where flame-retardance, and moisture/chemical resistance is critical. Cable can be installed in free air, in raceways or direct burial
    • UL Type TC 90°C
    • UL 1277
    • IEEE 1202
    • NEC 501-4(b)
    • VW-1

    Questions & Answers

    Ask a Question

    Part Number Table

    Part # Gauge Pairs Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M')
    IF11602-JX 16 1 .025'' .045'' .310'' 60

    Note: The data shown are approximate and subject to standard industry and manufacturer tolerances. Insert the letter designation in the XX location – EX, JX, KX.