CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield - 300V Cable

Home > Armored Cable > CCW > CCW Armored Instrumentation, Pairs/Triads, Individual and Overall Shield - 300V Cable
CCW Instrumentation - Ind. & Overall Shield - 105°C

*Product images are for illustrative purposes only and may differ from the actual product.

CCW Instrumentation - Ind. & Overall Shield - 105°C

Download Spec Sheet
Brochure

CCW Instrumentation - Ind. & Overall Shield - 105°C

Continuously Corrugated Welded Cable - CCW®
PVC/Nylon Insulation - PVC Jackets
Pairs & Triads - Individual & Overall Shields
105°C - 300 Volt - UL Type ITC-HL/PLTC

Construction
Category Conductor Description Bare, annealed copper conforming to ASTM B-3 and stranded in accordance with ASTM B8 (Class B)
Category Insulation Description Flame-retardant Polyvinyl Chloride (PVC) and nylon covering, rated 105°C per UL Standard 13 & 2250 Color Code: ICEA Method 1
Individual Shield Aluminum/polyester tape with 100% coverage Drain wire
Overall Shield Aluminum/polyester tape shield providing 100% coverage Drain wire
Inner Jacket Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 Low temperature performance meets ASTM D746 brittleness temperature at or below 40°C Nylon rip cord to facilitate jacket removal
Armor Impervious, continuously corrugated and welded aluminum per UL 1569 Meets grounding requirements of NEC Article 250
Overall Jacket Flame-retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C
  • For use as Power Limited Tray Cable on circuits rated 150V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725
  • For use as instrumentation tray cable on circuits rated 150V or less and 5 amps or less in accordance with NEC article 727
  • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class 1, Zones 1 and 2 hazardous locations per NEC articles 501, 502, 503 and 505
  • Installed indoors and outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial
  • Recognized for use on fixed or floating offshore petroleum facilities as recommended by American Petroleum Institute
  • UL Type PLTC and ITC-HL
  • UL 13, 2250, 1569, 1309, and 1581
  • IEEE 1202 available upon request

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Triads Nominal OD over Core Nominal OD over Armor Nominal OD Overall Material Weight (Lbs./M')
XL31602 16 2 - .440 .670 .780 268
XL31604 16 4 - .520 .710 .820 403
XL31608 16 8 - .690 .930 1.04 528
XL31612 16 12 - .810 1.06 1.17 783
XL31624 16 24 - 1.10 1.37 1.48 1628
XL61604 16 - 4 .580 .800 .910 378
XL61608 16 - 8 .790 1.02 1.13 621
XL61612 16 - 12 .950 1.19 1.30 879

Note: The information in this specification sheet is approximate and subject to standard industry and manufacturer tolerances.  Please verify specific requirements with your Omni Cable account manager General Cable CCW® is a registered trademark of General Cable