20-1 Non-Shielded Solid IMSA Cable Cable

Home > Traffic Signal > IMSA 20-1 Solid > 20-1 Non-Shielded Solid IMSA Cable Cable
IMSA 20-1 Solid

*Product images are for illustrative purposes only and may differ from the actual product.

IMSA 20-1 Solid

Download Spec Sheet

IMSA 20-1 Solid

20-1 IMSA
600 Volt
Solid

Construction
Category Conductor Description Solid bare copper
Category Insulation Description Polyethylene (PE)
Category Jacket Description Polyethylene (PE)
  • For use in signal systems, and approved for installation in underground ducts or as aerial cable supported by a messenger
  • Resistant to moisture, weather, and sunlight

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Conductors Jacket Thickness Nominal OD over Insulation Outside Diameter Inches Material Weight (Lbs./M')
IM2011410 14 10 0.06 .025 0.615 230
IM2011412 14 12 0.06 .025 0.635 270
IM2011416 14 16 0.06 .025 0.715 330
IM201142 14 2 0.045 .025 0.345 70
IM2011420 14 20 0.06 .025 0.75 440
IM2011425 14 25 0.08 .025 0.895 520
IM201143 14 3 0.045 .025 0.365 85
IM201144 14 4 0.045 .025 0.395 100
IM201145 14 5 0.045 .025 0.425 120
IM201147 14 7 0.045 .025 0.465 160
IM201149 14 9 0.045 .025 0.615 200
IM2011210 12 10 0.06 .030 0.7 325
IM2011212 12 12 0.06 .030 0.72 400
IM2011216 12 16 0.06 .030 0.875 490
IM201122 12 2 0.045 .030 0.405 90
IM2011220 12 20 0.08 .030 0.925 630
IM201123 12 3 0.045 .030 0.425 115
IM201124 12 4 0.045 .030 0.445 135
IM201125 12 5 0.045 .030 0.485 170
IM201127 12 7 0.06 .030 0.56 240
IM201129 12 9 0.06 .030 0.645 300
IM201102 10 2 0.045 .025 0.43 120
IM201082 8 2 0.045 .025 0.45 184

Note: The data shown is approximate and subject to standard industry and manufacturer tolerances